- MAP RANGE & MAP/WXR DISAGREE Message:
Notes:
- The Amber MAP RANGE DISAGREE message
shows when a new range has been selected on the
EFIS control panel and new map data is not
received from the FMC. All map data is blanked in
this condition. The display will default to the 40 mile
range, and the aircraft symbol, track line, heading
select bug, compass rose, GS, TAS, wind direction
and speed from the ADIRU will be shown.
- Indicates selected range on the EFIS control panel
does not match the WXR R/T and/or FMC range.
MAP / WXR RANGE DISAGREE Possible Causes:Before replacing any component perform DEU Bite (Maint/CDS/DEU#1 or #2/ Current status)~or~(Maint/FMCS/INFLT Faults)~or~(WXR R/T bite check in FWD E&E.).-Toggle FMC & control panel switch.
1.EFIS Control Panel
2.Flight Management Computer (FMC)
3.Weather Radar Transceiver
4.DEU
5.Wiring
MAP / WXR RANGE DISAGREE Message:
Circuit Breakers:FMCS CMPTR #1: P18-2 = E8 & A6.
FMCS CMPTR #2: P6-1 = D16.
Weather Radar R/T: P6-1 = D13.
EFIS Control Panel CAPT's: P18-2 = D1.
EFIS Control Panel F/O's: P6-1 = E13.
DEU#1 HOLD UP: P6-1 = D10.
DEU#1 PRIMARY: P18-2 = D5.
DEU#2 HOLD UP: P6-1 = D9.
DEU#2 PRIMARY: P6-1 = D11.
Applicable deferrals MEL 34-36 Flight Management Computer System
MEL 34-15 Weather Radar
- The Amber MAP RANGE DISAGREE message
shows when a new range has been selected on the
EFIS control panel and new map data is not
received from the FMC. All map data is blanked in
this condition. The display will default to the 40 mile
range, and the aircraft symbol, track line, heading
select bug, compass rose, GS, TAS, wind direction
and speed from the ADIRU will be shown.