- Marker Beacon (MB) Indication Will Not Display:
Notes:
- If the Marker Beacon data fails or is no computed data (NCD), there will be no display on both the Captain and F/O ADI.
MB Indication Will Not Display Possible Causes:Before replacing any component perform BITE if available. (VOR/MB Receiver #1 bite check.)
1.#1 VOR/MB Receiver
2.DEU.
3.Wiring from the #1 VOR/MB Receiver to the DEUs
No MB Audio Tone Possible Causes:Before replacing any component perform BITE if available. (VOR/MB Receiver #1 bite check in main E&E.)
1.#1 VOR/MB Receiver
2.Remote Electronics Unit (REU).
3.Wiring.
Marker Beacon (MB) Indication Will Not Display:
Circuit Breakers:Radio Navigation VOR/MKR BCN 1: P18-1 = A1.
Capt Audio (REU PWR): P6-2 = D23.
F/O Audio (REU PWR): P6-2 = D22.
OBS Audio (REU PWR): P6-2 = D24.
INTPH And Warn (REU PWR): P6-2 = D21.
DEU#1 HOLD UP: P6-1 = D10.
DEU#1 PRIMARY: P18-2 = D5.
DEU#2 HOLD UP: P6-1 = D9.
DEU#2 PRIMARY: P6-1 = D11.
Applicable deferrals MEL 34-14 Marker Beacon Receiver System