- Aircraft configuration prior to reset:
On ground.
Circuit breakers to reset:
Steps to clear warning:First, attempt to switch affected display unit to
DMC #3 using switching panel. Next, open associated display unit circuit breaker for 10 seconds, then reset.
Reset duration:5 seconds.
Results of power up test or reset:Pass: Display unit image is recovered.
Fail: Fault remains.
Notes:Also try reset of associated DMC. (DMC #1 = E11) (DMC #2 = Q8) (DMC #3 = Q9). All DMC’s must be the same manufacturer part number.
Sign off:AMM31-60-00-710-001. (EIS start)
Applicable deferrals:MEL31-63-01=Display Units.
320 Resets