- Aircraft configuration prior to reset:
On ground.
Circuit breakers to reset:
Steps to clear warning:First select DMC #3 to isolate fault to DU or DMC.
If DMC is at fault reset above associated circuit breaker for 5 seconds. If fault is with DU reset these (CAPT PFD/ND = G3/E1) (FO's PFD/ND = R3/R4) (Upper ECAM = E5) (Lower ECAM = R11).
Reset duration:5 seconds.
Results of power up test or reset:Pass: Display operates normally.
Fail: Fault remains.
Notes:No notes at this time.
Sign off:AMM31-60-00-710-001. (EIS start)
Applicable deferrals:MEL31-63-01=Display Units.
MEL31-63-02=Display Management Computers.
320 Resets